English grammar error spotting finding correction exercise Practise set 4

English Grammar Error Spotting Finding Exercise set 4

English Error spoting set 4 engineeringdev

In the following English grammar error spotting questions, some parts of the sentences have errors and some are correct. Find out which part of a sentence has an error. The number of that part is the answer. If a sentence is free from error, your answer is No error.


Question 1: Galileo proved that (1) / the earth revolves (2) / around the Sun. (3)/ No error. (4)

Answer : (4) No error



Question 2: He fell heavily (1)/ and this caused (2)/ him great pain. (3)/ No error (4)

Answer : (3) a great pain will replace great pain.



Question 3: The chief guest (1)/ entered into (2)/ the room. (3)/ No error (4)

Answer : (2) Use of into is incorrect. The chief guest entered the room is the correct sentence.



Question 4: Raghu came out of the bathroom (1)/with a towel (2)/in the hand. (3)/No error. (4)

Answer : (3) Use of the (Def. Art.) is incorrect. Articles are not used with Parts of body. Hence, in his hand is the right usage.



Question 5: The burglar stole all the money (1)/ in the house but surprisingly missed (2)/ the jewelleries in the locker. (3)/ No error (4)

Answer : (3) The Plural of jewellery (Uncountable) is never jewelleries. Hence, jewellery in the locker is the right usage.



📎 English grammar error spotting finding correction exercise Practise set 3

Question 6: I always enjoy (1)/ to read (2)/ books. (3)/ No error (4)

Answer : (2) Here, Gerund i.e. reading is the right usage.



Question 7: If you have a way with words, (1)/ a good sense of design and administration ability (2) / you may enjoy working in the high pressure world of advertising. (3)/ No error. (4)

Answer : (2) administrative will replace administration because – an Adj. qualifies a Noun and administrative is an Adj. qualifying ability (Noun). Hence, a good sense of design and administrative ability is the right usage



Question 8: The job is (1)/under the direct (2)/ of Mrs Jones. (3)/ No error (4)

Answer : (2) Here, under the direction (supervision) (Noun) .... should be used.



Question 9: Mohan leapt (1)/ on the opportunity (2)/ that came his way. (3)/ No error. (4)

Answer : (2) leap at something : to accept a chance or an opportunity quickly. Hence, at the opportunity is the right usage



Question 10: Neither the size (1)/ nor the colour of the gloves (2)/ were right.(3)/ No error (4)

Answer : (3) When we use Neither - nor, the Verb agrees according to the Number/Person of the nearest Subject. Here, the colour is a Singular Subject. Hence, was (Singular Verb) right is the right usage.



📎 English grammar error spotting finding correction exercise Practise set 5

Question 11: People living in low-lying areas (1)/ find it difficult (2)/ to cope up with the floods.(3)/ No error. (4) Directions

Answer : (3) Use of up is incorrect. to cope with the floods is the right usage. cope with (Phr.V.) : to manage to deal with someone/something



Question 12: The introduction of job-oriented courses (1)/in the self-financing colleges (2)/ attract many students (3)./ No error (4)

Answer : (3) attracts will replace attract because – The introduction of job – oriented courses (Main Subject) is in Singular. Hence, the Verb will also be in Singular, as aVerb agrees with its Subject in Number. Singular Subject Singular Verb (Main Verb + S), Plural Subject Plural Verb (Main Verb without S) Hence, attracts many students is the right usage.



Question 13: There is (1)/ no place of you (2)/ in this compartment. (3)/ No error (4)

Answer : (2) no room for you will replace no place of you room (Noun) : empty space that can be used for a particular purpose Look at the examples given below : Do you have a room for a computer on your desk ? There wasn’t enough room for all the guests.



Question 14: Though the police tried all sorts of methods to illicit (1)/ information from the public (2)/ they remained silent. (3)/ No error (4)

Answer : (1) elicit will replace illicit elicit (Verb) : to get information or a reaction from somebody, often with difficulty illicit (Adj.) : not allowed by law; illegal Look at the examples given below : In the prison, inmates are prohibited from having illicit items such as drugs, alcohol, and weapons. The comedian hoped his jokes would elicit a great deal of laughter from the audience. Hence, Though the police tried all sorts of methods to elicit is the right usage.



Question 15: A period of six years (1)/ have elapsed (2)/ since I last saw her. (3)/ No error (4)

Answer : (2) A period of six years is a singular subject. Hence, Singular Verb i.e. has elapsed .... should be used.



📎 English grammar error spotting finding correction exercise Practise set 6

Question 16: In world of ours (1)/ one has to compete (2)/ for almost everything. (3)/ No error (4)

Answer : (1) the (Def. Art.) In this world of ours is the right usage. Here, this is used to refer to a situation that is continuing to exist/to an event that is continuing to take place.



Question 17: He lost heart (1)/ because he could not cope up with (2)/ the difficulties in life. (3)/ No error (4)

Answer : (2) Cope with = to face and deal with responsibilities, problems or difficulties successfully. Hence, because he could not cope with .... should be used.



Question 18: The lawyer asked (1)/ if it was worth to take (2)/ the matter to court. (3)/ No error. (4)

Answer : (2) worth taking will replace worth to take; taking here is a Gerund. Hence, if it was worth taking is the right usage



Question 19: The teacher prevented (1)/ the boys (2)/ to go there. (3)/ No error (4)

Answer : (3) Here, prevented the boys from going (Gerund) to..... should be used, not an infinitive.



Question 20: It is time you (1)/ decide on your next (2)/ course of action. (3)/ No error (4)

Answer : (2) decided will replace decide because – we use the expression It’s time + Subject + Past Verb form to refer to the present moment. It is time + you + decided ---Look at the examples given below : It is time we went home. It is high time you went on a diet. Hence, decided on your next is the right usage.



Comments

Post a Comment

Popular posts from this blog

pneumatic comparator and solex pneumatic comparator

Image
Principle of pneumatic comparator The measurement is made by taking reading using master gauge of known accuracy and comparing with component reading It uses a controlled, pressurised jet of air to measure small dimensional variation in the size of component The working principle of pneumatic comparator depends on the flow of air between the gauge head and the component being checked Important characteristics Very high magnifications are possible It can be used to measure diameters, length, squareness, parallelisms, concentricity,taper, and other geometric conditions. Internal dimensions can be readily measured , in other words, while measuring a bore it can reveal complete details of size, taper, straightness,camber and bell mouth etc. It is independent of the operator skill High pressure air gauging can be done by cleaning the parts which helps to eliminate errors due to dirt and foreign matter. As there is no physical contact made either with the setting gauge (or)...
All Blog Posts

Metrology- Slip gauge, Dial indicator, Bevel protractor, Sine bar, Angle gauge

Image
METROLOGY Metrology is the science of measurements. In manufacturing industry the dimensions are measured to control the shape and sizes of an object Controlled measurements are necessary in the manufacture of interchangeable parts Linear Measuring Instruments Slip gauges Dial indicator Angle Measuring Instruments Bevel Protractor Sine bar Angle gauge Slip gauges Slip gauges are used for precise measurement of parts and for verifying measuring tools such as micrometers,comparators and various limit gauges Slip gauges are rectangular blocks made of alloy steel having a cross-section of about 32mm by 9mm The distance between two opposite faces determines the size of the gauge During use, the required number of gauge blocks are used together to know the required dimension. Dial Indicators Dial indicators are used to test and inspect the size and trueness of a finished work It is measured to an accuracy of 0.01mm They are also used in conjunction with other measuring instruments like ...
All Blog Posts

interferometer and interferometry

Image
Interferometer Interferometer is an optical device used for measuring flatness of a surface and also for determining the thickness of slip gauges. It is an extension of the application of optical flat. Interferometers are based upon the principle of “ interference “ and employ wavelength of light as their measuring units. The interferometers make use of beam divider that splits an incoming ray into two parts. These two parts of the ray travel along different paths until they are recombined, usually in the same beam divider. An interferometer is an optical device which utilizes the effect of interference. Typically, it starts with some input beam, splits it into two separate beams with some kind of beam splitter (a partially transmissive mirror), possibly exposes some of these beams to some external influences (e.g. some length changes or refractive index changes in a transparent medium), and recombines the beams on another beam splitter. The power or the spatial shape of the resulti...
All Blog Posts